Toshiba Semiconductor and Storage
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
TB6584AFNG
Voir les détails DataSheets

TB6584AFNG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor driver
  • Characteristics: High voltage, low power consumption
  • Package: SOP (Small Outline Package)
  • Essence: Efficient motor control
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Operating Voltage: 2.5V to 16V
  • Output Current: 1.2A (continuous), 3.2A (peak)
  • Number of Channels: 2
  • Control Interface: PWM (Pulse Width Modulation)
  • Protection Features: Overcurrent, thermal shutdown, undervoltage lockout

Detailed Pin Configuration

The TB6584AFNG has a total of 16 pins. The pin configuration is as follows:

  1. VCC1: Power supply for logic circuitry
  2. IN1A: Input signal for Channel A
  3. IN1B: Input signal for Channel B
  4. GND1: Ground for logic circuitry
  5. OUT1A: Output for Channel A
  6. OUT1B: Output for Channel B
  7. VREF1: Reference voltage for Channel A
  8. VREF2: Reference voltage for Channel B
  9. VCC2: Power supply for motor driver
  10. VM: Motor power supply
  11. GND2: Ground for motor driver
  12. OUT2A: Output for Channel A
  13. OUT2B: Output for Channel B
  14. IN2A: Input signal for Channel A
  15. IN2B: Input signal for Channel B
  16. VCC3: Power supply for internal circuitry

Functional Features

  • Dual H-bridge configuration for independent control of two motors
  • Built-in protection features for safe operation
  • Low power consumption for energy efficiency
  • High voltage capability for driving various motors
  • PWM control interface for precise speed and direction control

Advantages and Disadvantages

Advantages

  • Efficient motor control with high voltage capability
  • Compact SOP package for space-saving designs
  • Built-in protection features ensure safe operation
  • Low power consumption for energy efficiency

Disadvantages

  • Limited output current compared to some other motor drivers
  • Requires external PWM signal for control

Working Principles

The TB6584AFNG is a dual H-bridge motor driver IC. It utilizes the H-bridge configuration to control the direction and speed of two motors independently. The control interface accepts PWM signals, allowing precise control over motor speed and direction. The IC also incorporates protection features such as overcurrent, thermal shutdown, and undervoltage lockout to ensure safe operation.

Detailed Application Field Plans

The TB6584AFNG can be used in various applications that require efficient motor control. Some potential application fields include:

  1. Robotics: Controlling the movement of robot arms or mobile robots.
  2. Automotive: Driving small motors in automotive systems like power windows or seat adjustments.
  3. Home Appliances: Controlling the motors in appliances such as washing machines or vacuum cleaners.
  4. Industrial Automation: Precise control of motors in conveyor belts or assembly line equipment.
  5. Consumer Electronics: Motor control in devices like cameras, printers, or drones.

Detailed and Complete Alternative Models

  1. L293D: Dual H-bridge motor driver with similar specifications and functionality.
  2. DRV8833: Dual H-bridge motor driver with higher output current capability.
  3. A4988: Stepper motor driver with advanced features for precise positioning.

These alternative models offer similar functionality and can be considered based on specific requirements and design constraints.

Word count: 431 words

Énumérez 10 questions et réponses courantes liées à l'application de TB6584AFNG dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of TB6584AFNG in technical solutions:

  1. Q: What is TB6584AFNG? A: TB6584AFNG is a motor driver IC (integrated circuit) designed for controlling DC motors, commonly used in various technical applications.

  2. Q: What voltage range does TB6584AFNG support? A: TB6584AFNG supports a wide voltage range from 2.5V to 13.5V, making it suitable for different power supply configurations.

  3. Q: How many motors can be controlled using TB6584AFNG? A: TB6584AFNG can control up to two DC motors simultaneously, making it ideal for applications requiring dual motor control.

  4. Q: What is the maximum current that TB6584AFNG can handle? A: TB6584AFNG can handle a maximum continuous current of 1.2A per channel, allowing it to drive motors with moderate power requirements.

  5. Q: Can TB6584AFNG control stepper motors? A: No, TB6584AFNG is specifically designed for DC motor control and cannot be used to control stepper motors.

  6. Q: Does TB6584AFNG have built-in protection features? A: Yes, TB6584AFNG includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  7. Q: Can TB6584AFNG be controlled using PWM signals? A: Yes, TB6584AFNG supports PWM (Pulse Width Modulation) control, allowing precise speed and direction control of the connected motors.

  8. Q: Is TB6584AFNG compatible with microcontrollers or Arduino boards? A: Yes, TB6584AFNG can be easily interfaced with microcontrollers or Arduino boards using digital I/O pins for motor control.

  9. Q: What is the typical operating temperature range of TB6584AFNG? A: The typical operating temperature range of TB6584AFNG is -40°C to +85°C, making it suitable for a wide range of environmental conditions.

  10. Q: Can TB6584AFNG be used in battery-powered applications? A: Yes, TB6584AFNG's low voltage operation and low power consumption make it suitable for battery-powered applications where motor control is required.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.