Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6118N32AMR-G
Voir les détails DataSheets

XC6118N32AMR-G

Product Overview

Category

XC6118N32AMR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Package: SOT-23-5
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

The specifications of XC6118N32AMR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.2V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N32AMR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

The functional features of XC6118N32AMR-G include:

  • Low dropout voltage for efficient regulation
  • Low quiescent current for power-saving operation
  • Enable pin for easy control of the regulator
  • Stable output voltage even under varying load conditions
  • Short-circuit protection for enhanced safety

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Enable pin allows for convenient control of the regulator. - Stable output voltage provides reliable performance. - Short-circuit protection enhances safety.

Disadvantages: - Limited output current capacity (150mA).

Working Principles

XC6118N32AMR-G works based on the principle of a low dropout voltage regulator. It regulates the input voltage to a stable output voltage by utilizing an internal pass transistor and feedback mechanism. The enable pin allows the user to control the regulator's operation, enabling or disabling the output voltage as needed.

Detailed Application Field Plans

XC6118N32AMR-G finds applications in various electronic devices and circuits where a stable and regulated voltage is required. Some potential application fields include:

  1. Battery-powered devices: Used to regulate voltage for portable electronics such as smartphones, tablets, and wearable devices.
  2. IoT devices: Provides stable voltage for sensors, microcontrollers, and communication modules in Internet of Things (IoT) applications.
  3. Automotive electronics: Ensures reliable voltage regulation for automotive systems like infotainment systems, lighting, and control units.
  4. Industrial equipment: Used in industrial automation, robotics, and control systems to maintain consistent voltage levels.

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N32AMR-G are:

  1. LM1117-3.3: A popular low dropout voltage regulator with similar specifications.
  2. MCP1700-3302E: Another option with comparable characteristics and package type.
  3. TS2937CX33: A low dropout voltage regulator with a higher output current capability.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 409 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6118N32AMR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6118N32AMR-G in technical solutions:

  1. Q: What is XC6118N32AMR-G? A: XC6118N32AMR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6118N32AMR-G? A: The operating voltage range of XC6118N32AMR-G is typically between 0.65V and 6.0V.

  3. Q: How does XC6118N32AMR-G work? A: XC6118N32AMR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Q: What is the output type of XC6118N32AMR-G? A: XC6118N32AMR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Q: Can XC6118N32AMR-G be used in battery-powered applications? A: Yes, XC6118N32AMR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: What is the accuracy of XC6118N32AMR-G? A: The accuracy of XC6118N32AMR-G is typically ±1.0% at room temperature.

  7. Q: Can XC6118N32AMR-G tolerate reverse polarity? A: No, XC6118N32AMR-G is not designed to tolerate reverse polarity. It should be connected with the correct polarity to avoid damage.

  8. Q: What is the temperature range for XC6118N32AMR-G? A: The operating temperature range for XC6118N32AMR-G is typically between -40°C and +85°C.

  9. Q: Can XC6118N32AMR-G be used in automotive applications? A: Yes, XC6118N32AMR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Q: Are there any application notes or reference designs available for XC6118N32AMR-G? A: Yes, Torex Semiconductor provides application notes and reference designs for XC6118N32AMR-G on their official website, which can help users understand its usage in different technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.