Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6108N33DGR-G
Voir les détails DataSheets

XC6108N33DGR-G

Product Overview

Category

XC6108N33DGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6108N33DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N33DGR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N33DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6108N33DGR-G ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
  • Overcurrent protection: The device incorporates overcurrent protection to safeguard connected components.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range enables compatibility with various power sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect efficiency in low input voltage scenarios.

Working Principles

XC6108N33DGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. This ensures a stable output even when the input voltage varies.

Detailed Application Field Plans

XC6108N33DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N33DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - AP2112K-3.3TRG1 - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 314 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6108N33DGR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6108N33DGR-G in technical solutions:

  1. Q: What is XC6108N33DGR-G? A: XC6108N33DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108N33DGR-G? A: The operating voltage range of XC6108N33DGR-G is typically from 0.9V to 6.0V.

  3. Q: How does XC6108N33DGR-G help in technical solutions? A: XC6108N33DGR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to initiate a safe startup or recovery process.

  4. Q: Can XC6108N33DGR-G be used in battery-powered applications? A: Yes, XC6108N33DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6108N33DGR-G? A: XC6108N33DGR-G has an open-drain output type, which allows for flexibility in connecting external components.

  6. Q: What is the typical reset threshold voltage of XC6108N33DGR-G? A: The typical reset threshold voltage of XC6108N33DGR-G is 3.3V, but it can be customized based on specific requirements.

  7. Q: Is XC6108N33DGR-G suitable for automotive applications? A: Yes, XC6108N33DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6108N33DGR-G be used in industrial control systems? A: Absolutely, XC6108N33DGR-G is well-suited for industrial control systems due to its wide operating voltage range and robust performance.

  9. Q: Does XC6108N33DGR-G have built-in protection features? A: Yes, XC6108N33DGR-G includes built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  10. Q: What package options are available for XC6108N33DGR-G? A: XC6108N33DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary based on specific datasheet or application requirements.