L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6108N15DGR-G

XC6108N15DGR-G

Product Overview

Category

XC6108N15DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the output voltage.

Characteristics

  • Voltage regulation: It provides a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: The regulator can operate with a very small difference between the input and output voltages.
  • Low quiescent current: It consumes minimal current when there is no load.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.

Package

XC6108N15DGR-G is available in a compact surface-mount package.

Essence

The essence of XC6108N15DGR-G lies in its ability to maintain a constant output voltage, ensuring reliable operation of electronic devices.

Packaging/Quantity

The regulator is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 1.5V
  • Maximum output current: 100mA
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 25µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108N15DGR-G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Voltage regulation: Maintains a constant output voltage even with varying input voltage.
  • Low dropout voltage: Allows operation with a small voltage difference between input and output.
  • Low quiescent current: Minimizes power consumption when no load is present.
  • Thermal shutdown protection: Prevents damage due to excessive heat.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable operation of electronic devices.
  • Low dropout voltage enables efficient power conversion.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection enhances safety.

Disadvantages

  • Limited maximum output current (100mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC6108N15DGR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6108N15DGR-G finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108N15DGR-G are: - LM1117-1.5 - MCP1701-1502E/TO - LP2985-1.5

These models offer similar voltage regulation capabilities and can be used as substitutes based on specific requirements.

Word count: 345 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6108N15DGR-G dans les solutions techniques

  1. Question: What is the XC6108N15DGR-G?
    Answer: The XC6108N15DGR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in technical solutions to monitor and detect voltage levels.

  2. Question: What is the operating voltage range of XC6108N15DGR-G?
    Answer: The XC6108N15DGR-G has an operating voltage range of 0.7V to 10.0V.

  3. Question: What is the output type of XC6108N15DGR-G?
    Answer: The XC6108N15DGR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC6108N15DGR-G?
    Answer: The typical quiescent current consumption of XC6108N15DGR-G is 1.0µA.

  5. Question: Can XC6108N15DGR-G be used for overvoltage detection?
    Answer: No, XC6108N15DGR-G is specifically designed for undervoltage detection. It triggers an output signal when the input voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6108N15DGR-G?
    Answer: The accuracy of the undervoltage detection threshold in XC6108N15DGR-G is ±1.5%.

  7. Question: Does XC6108N15DGR-G have built-in hysteresis?
    Answer: Yes, XC6108N15DGR-G has built-in hysteresis of typically 5% to prevent oscillation caused by voltage fluctuations near the threshold.

  8. Question: What is the operating temperature range of XC6108N15DGR-G?
    Answer: The operating temperature range of XC6108N15DGR-G is -40°C to +85°C.

  9. Question: Can XC6108N15DGR-G be used in battery-powered applications?
    Answer: Yes, XC6108N15DGR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  10. Question: Is XC6108N15DGR-G available in different package types?
    Answer: Yes, XC6108N15DGR-G is available in various package types, including SOT-25 and USP-6B.