Voir les spécifications pour les détails du produit.
XC6108C32DGR-G
Product Overview
Category
XC6108C32DGR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Package: DGR-G
- Essence: Voltage regulator
- Packaging/Quantity: Varies depending on supplier
Specifications
The specifications of XC6108C32DGR-G are as follows:
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.2V
- Maximum Output Current: 150mA
- Dropout Voltage: 100mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The pin configuration of XC6108C32DGR-G is as follows:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
XC6108C32DGR-G offers the following functional features:
- Low dropout voltage
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - Low dropout voltage ensures efficient voltage regulation - Low quiescent current minimizes power consumption - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability
Disadvantages: - Limited maximum output current may not be suitable for high-power applications
Working Principles
XC6108C32DGR-G works by regulating the input voltage to a stable output voltage of 3.2V. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring a consistent output even with varying input voltages.
Detailed Application Field Plans
XC6108C32DGR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C32DGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.
Énumérez 10 questions et réponses courantes liées à l'application de XC6108C32DGR-G dans les solutions techniques
Sure! Here are 10 common questions and answers related to the application of XC6108C32DGR-G in technical solutions:
1. What is XC6108C32DGR-G? - XC6108C32DGR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
2. What is the operating voltage range of XC6108C32DGR-G? - The operating voltage range of XC6108C32DGR-G is from 0.7V to 6.0V.
3. What is the output type of XC6108C32DGR-G? - XC6108C32DGR-G has an open-drain output type.
4. What is the typical quiescent current of XC6108C32DGR-G? - The typical quiescent current of XC6108C32DGR-G is 1.0µA.
5. What is the purpose of the built-in delay circuit in XC6108C32DGR-G? - The built-in delay circuit in XC6108C32DGR-G provides a delay time to prevent false detections caused by momentary voltage fluctuations.
6. Can XC6108C32DGR-G be used for overvoltage detection? - No, XC6108C32DGR-G is specifically designed for undervoltage detection only.
7. What is the maximum reset output current of XC6108C32DGR-G? - The maximum reset output current of XC6108C32DGR-G is 20mA.
8. Is XC6108C32DGR-G suitable for automotive applications? - Yes, XC6108C32DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification.
9. Can XC6108C32DGR-G be used in battery-powered devices? - Yes, XC6108C32DGR-G can be used in battery-powered devices as it has a low quiescent current and wide operating voltage range.
10. What is the package type of XC6108C32DGR-G? - XC6108C32DGR-G is available in a SOT-25 package.
Please note that these answers are based on general information about XC6108C32DGR-G and may vary depending on specific application requirements.