L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
M95160-WMN6TP

M95160-WMN6TP

Product Overview

Category

The M95160-WMN6TP belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, automotive systems, and consumer electronics.

Characteristics

  • Non-volatile: The M95160-WMN6TP retains stored data even when power is removed.
  • High capacity: This chip has a storage capacity of 16 kilobits (2 kilobytes).
  • Serial interface: It uses a serial peripheral interface (SPI) for communication with the host device.
  • Low power consumption: The M95160-WMN6TP operates at low voltage levels, making it energy-efficient.
  • Wide temperature range: It can function reliably in temperatures ranging from -40°C to +125°C.

Package

The M95160-WMN6TP is available in an industry-standard SOIC-8 package. This package provides mechanical protection and facilitates easy integration into circuit boards.

Essence

The essence of the M95160-WMN6TP lies in its ability to store and retrieve digital information reliably, even in harsh operating conditions.

Packaging/Quantity

These chips are typically sold in reels or tubes, with each reel or tube containing a specific quantity of M95160-WMN6TP chips. The exact quantity may vary depending on the manufacturer's packaging specifications.

Specifications

  • Memory capacity: 16 kilobits (2 kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Supply voltage: 1.8V to 5.5V
  • Operating temperature range: -40°C to +125°C
  • Write endurance: 4 million write cycles
  • Data retention: 200 years

Detailed Pin Configuration

The M95160-WMN6TP chip has eight pins, each serving a specific function:

  1. Chip Select (CS): Enables communication with the host device.
  2. Serial Clock (SCK): Provides the clock signal for data transfer.
  3. Serial Data Input (SI): Receives data from the host device.
  4. Serial Data Output (SO): Transmits data to the host device.
  5. Write Protect (WP): Allows or prevents write operations.
  6. Ground (GND): Connected to the ground reference of the system.
  7. Supply Voltage (VCC): Power supply input.
  8. Not Connected (NC): No electrical connection.

Functional Features

  • High-speed data transfer: The M95160-WMN6TP supports fast data transfer rates, allowing for efficient read and write operations.
  • Hardware write protection: The chip includes a write protect pin (WP) that can be used to prevent accidental modification of stored data.
  • Error detection and correction: It incorporates error detection and correction mechanisms to ensure data integrity.
  • Low power consumption: The M95160-WMN6TP operates at low voltage levels, minimizing power consumption in battery-powered devices.

Advantages and Disadvantages

Advantages

  • Compact size and easy integration into electronic circuits.
  • Wide operating temperature range enables usage in various environments.
  • High data retention and endurance ensure long-term reliability.
  • Serial interface simplifies communication with the host device.
  • Low power consumption prolongs battery life in portable devices.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively slower data transfer rate compared to some newer memory technologies.
  • Vulnerable to electromagnetic interference (EMI) due to its non-shielded package.

Working Principles

The M95160-WMN6TP utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. It stores information in a grid of memory cells, with each cell capable of holding a single bit of data. The chip uses a combination of electrical signals and voltage levels to read, write, and erase data from these cells.

Detailed Application Field Plans

The M95160-WMN6TP finds applications in various fields, including:

  1. Automotive systems: Used for storing vehicle configuration settings, mileage data, and fault codes.
  2. Industrial automation: Employed in programmable logic controllers (PLCs) for storing program code and system parameters.
  3. Consumer electronics: Integrated into devices like smart TVs, set-top boxes, and gaming consoles for firmware storage and data logging.
  4. Medical devices: Utilized for storing patient records, device configurations, and calibration data in medical equipment.
  5. Internet of Things (IoT): Incorporated into IoT devices for data logging, device identification, and secure key storage.

Detailed and Complete Alternative Models

  1. M95080-WMN6TP: Similar to the M95160-WMN6TP but with half the storage capacity (8 kilobits).
  2. M95320-WMN6TP: Offers double the storage capacity

Énumérez 10 questions et réponses courantes liées à l'application de M95160-WMN6TP dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of M95160-WMN6TP in technical solutions:

  1. Q: What is M95160-WMN6TP? A: M95160-WMN6TP is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by STMicroelectronics.

  2. Q: What is the storage capacity of M95160-WMN6TP? A: The M95160-WMN6TP has a storage capacity of 16 kilobits, which is equivalent to 2 kilobytes.

  3. Q: What is the operating voltage range for M95160-WMN6TP? A: The operating voltage range for M95160-WMN6TP is typically between 1.8V and 5.5V.

  4. Q: What is the maximum clock frequency supported by M95160-WMN6TP? A: The maximum clock frequency supported by M95160-WMN6TP is 10 MHz.

  5. Q: Can M95160-WMN6TP be used in automotive applications? A: Yes, M95160-WMN6TP is designed to meet the requirements of automotive applications and can operate in harsh environments.

  6. Q: Does M95160-WMN6TP support SPI (Serial Peripheral Interface) communication? A: Yes, M95160-WMN6TP supports SPI communication protocol, making it compatible with a wide range of microcontrollers and other devices.

  7. Q: Is M95160-WMN6TP capable of multiple read and write cycles? A: Yes, M95160-WMN6TP supports up to 1 million write cycles and unlimited read cycles.

  8. Q: Can M95160-WMN6TP retain data during power loss? A: Yes, M95160-WMN6TP has built-in EEPROM technology that allows it to retain data even when the power is disconnected.

  9. Q: What is the typical programming time for M95160-WMN6TP? A: The typical programming time for M95160-WMN6TP is around 5 milliseconds per byte.

  10. Q: Are there any specific storage or handling requirements for M95160-WMN6TP? A: It is recommended to store M95160-WMN6TP in a cool and dry environment, and avoid exposure to excessive heat, moisture, or static electricity.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of M95160-WMN6TP.