Voir les spécifications pour les détails du produit.
BCR12FM-12LB#BH0
Product Category: Integrated Circuit
Basic Information Overview: - Category: Voltage Regulator - Use: Regulating voltage in electronic circuits - Characteristics: High precision, low dropout voltage, thermal shutdown protection - Package: TO-252-3 (DPAK) - Essence: Ensures stable and regulated voltage output - Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications: - Input Voltage Range: 4.5V to 18V - Output Voltage Range: 1.2V to 16V - Output Current: 1A - Dropout Voltage: 0.6V at 1A - Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)
Functional Features: - High accuracy and stability - Low dropout voltage - Thermal shutdown protection - Short-circuit current limit
Advantages and Disadvantages: - Advantages: - Precise voltage regulation - Wide input voltage range - Thermal protection for safety - Disadvantages: - Limited output current capacity - Sensitive to external noise
Working Principles: The BCR12FM-12LB#BH0 operates by comparing the reference voltage with the feedback voltage to adjust the output voltage, ensuring a stable and regulated output.
Detailed Application Field Plans: - Power supplies for microcontrollers and other digital ICs - Battery-powered devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models: - LM317: Adjustable voltage regulator - LM1117: Low dropout voltage regulator - LT1086: High current voltage regulator
This integrated circuit, BCR12FM-12LB#BH0, is a versatile voltage regulator suitable for various electronic applications due to its high precision and reliability.
[Word count: 294]
Énumérez 10 questions et réponses courantes liées à l'application de BCR12FM-12LB#BH0 dans les solutions techniques
What is the BCR12FM-12LB#BH0?
- The BCR12FM-12LB#BH0 is a 12A, 600V, NPN Silicon Power Transistor designed for use in general-purpose switching and amplifier applications.
What are the key features of the BCR12FM-12LB#BH0?
- The key features include a high current capability, low saturation voltage, and high reliability making it suitable for various technical solutions.
In what technical solutions can the BCR12FM-12LB#BH0 be used?
- It can be used in applications such as motor control, lighting control, power supplies, and industrial automation.
What is the maximum voltage and current rating of the BCR12FM-12LB#BH0?
- The BCR12FM-12LB#BH0 has a maximum voltage rating of 600V and a maximum current rating of 12A.
What are the thermal characteristics of the BCR12FM-12LB#BH0?
- The thermal resistance from junction to case (Rth(j-c)) is 1.67°C/W, and the operating temperature range is -40°C to 150°C.
Does the BCR12FM-12LB#BH0 require any special heat sinking or cooling?
- Depending on the application and power dissipation, proper heat sinking may be required to ensure optimal performance and reliability.
Are there any specific considerations for driving the BCR12FM-12LB#BH0?
- It is important to ensure proper drive voltage and current levels to fully turn on the transistor and minimize switching losses.
What are the recommended mounting and soldering techniques for the BCR12FM-12LB#BH0?
- The device should be mounted on a suitable heat sink using a thermally conductive grease, and proper soldering techniques should be followed as per the datasheet recommendations.
Can the BCR12FM-12LB#BH0 be used in automotive applications?
- Yes, the BCR12FM-12LB#BH0 is suitable for certain automotive applications, but it is important to verify compliance with automotive standards and requirements.
Where can I find detailed technical specifications and application notes for the BCR12FM-12LB#BH0?
- Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or distributor of the component.