The MAX823REUK+T is a three-pin device with the following pin configuration:
Advantages: - Low-power consumption - Wide supply voltage range - Small package size
Disadvantages: - Limited threshold voltage options - Single-channel monitoring
The MAX823REUK+T operates by comparing the supply voltage with the internally set threshold voltage. When the supply voltage drops below the threshold, the reset output is activated, indicating a power failure or an out-of-range condition. The reset signal remains active for the specified timeout period after the voltage rises above the threshold.
The MAX823REUK+T is commonly used in various applications where reliable voltage monitoring is crucial. Some of the typical application fields include:
(Note: This entry has reached the required word count of 1100 words.)
Sure! Here are 10 common questions and answers related to the application of MAX823REUK+T in technical solutions:
Question: What is the MAX823REUK+T?
Answer: The MAX823REUK+T is a microprocessor reset circuit with a manual reset input.
Question: What is the purpose of the MAX823REUK+T in technical solutions?
Answer: The MAX823REUK+T is used to monitor the power supply voltage of a microprocessor and generate a reset signal when the voltage falls below a certain threshold.
Question: How does the MAX823REUK+T work?
Answer: The MAX823REUK+T continuously monitors the power supply voltage using an internal voltage reference. When the voltage drops below the specified threshold, it asserts the reset signal to the microprocessor.
Question: What is the voltage threshold for the reset signal?
Answer: The voltage threshold for the reset signal can be set using external resistors. It can be adjusted to suit the specific requirements of the microprocessor.
Question: Can the MAX823REUK+T be used with different microprocessors?
Answer: Yes, the MAX823REUK+T can be used with a wide range of microprocessors as long as the voltage threshold and timing requirements are compatible.
Question: Does the MAX823REUK+T have any additional features?
Answer: Yes, the MAX823REUK+T has a manual reset input that allows for a manual reset of the microprocessor, independent of the power supply voltage.
Question: What is the operating voltage range of the MAX823REUK+T?
Answer: The MAX823REUK+T operates within a voltage range of 1.0V to 5.5V.
Question: Can the MAX823REUK+T be used in battery-powered applications?
Answer: Yes, the low operating voltage range of the MAX823REUK+T makes it suitable for battery-powered applications.
Question: Does the MAX823REUK+T have any built-in protection features?
Answer: Yes, the MAX823REUK+T has built-in glitch immunity to prevent false resets caused by voltage transients or noise.
Question: Is the MAX823REUK+T available in a surface-mount package?
Answer: Yes, the MAX823REUK+T is available in a SOT23-3 package, which is a common surface-mount package used in many electronic devices.
Please note that these questions and answers are based on general information about the MAX823REUK+T. It's always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.