Maxim Integrated
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MAX7321AEE+T
Voir les détails DataSheets

MAX7321AEE+T

Product Overview

  • Category: Integrated Circuit
  • Use: GPIO Expander
  • Characteristics: Low-voltage, I2C-Compatible 8-Bit I/O Port Expander with Interrupt Output and Configuration Registers
  • Package: 16-pin QSOP (Quarter Small Outline Package)
  • Essence: The MAX7321AEE+T is a versatile GPIO expander that allows for easy expansion of general-purpose input/output (GPIO) ports in various applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 2500 units per reel.

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Number of I/O Ports: 8
  • I/O Port Voltage Range: 0V to VDD
  • Maximum Sink/Source Current per I/O: ±4mA
  • I2C Bus Compatibility: Standard-mode (100kHz) and Fast-mode (400kHz)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX7321AEE+T features a 16-pin QSOP package with the following pin configuration:

  1. SDA - Serial Data Input/Output
  2. SCL - Serial Clock Input
  3. A0 - Address Input Bit 0
  4. A1 - Address Input Bit 1
  5. INT - Interrupt Output
  6. GND - Ground
  7. P0 - General-Purpose I/O Port 0
  8. P1 - General-Purpose I/O Port 1
  9. P2 - General-Purpose I/O Port 2
  10. P3 - General-Purpose I/O Port 3
  11. P4 - General-Purpose I/O Port 4
  12. P5 - General-Purpose I/O Port 5
  13. P6 - General-Purpose I/O Port 6
  14. P7 - General-Purpose I/O Port 7
  15. VDD - Supply Voltage
  16. NC - No Connection

Functional Features

  • Low-voltage operation allows for compatibility with a wide range of systems.
  • I2C interface enables easy communication with microcontrollers and other devices.
  • Interrupt output provides efficient event notification.
  • Configuration registers allow for flexible customization of the device's behavior.

Advantages and Disadvantages

Advantages: - Versatile GPIO expander suitable for various applications. - Low-voltage operation enhances compatibility. - I2C interface simplifies integration with other devices. - Interrupt output improves efficiency in event-driven systems.

Disadvantages: - Limited number of I/O ports (8 in total). - Maximum sink/source current per I/O is relatively low (±4mA).

Working Principles

The MAX7321AEE+T operates as a GPIO expander by utilizing an I2C interface to communicate with a master device, such as a microcontroller. The device acts as an intermediary between the master device and external peripherals, expanding the available GPIO ports. It can be configured through its registers to suit specific application requirements.

Detailed Application Field Plans

The MAX7321AEE+T finds applications in various fields, including but not limited to: - Industrial automation - Consumer electronics - Internet of Things (IoT) devices - Home automation - Robotics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MAX7321AEE+T are: - MCP23008 from Microchip Technology Inc. - PCF8574 from NXP Semiconductors - TCA9539 from Texas Instruments - SN74HC595 from Texas Instruments

These alternatives provide comparable GPIO expansion capabilities and can be considered based on specific project requirements.

Word count: 314 words

Énumérez 10 questions et réponses courantes liées à l'application de MAX7321AEE+T dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of MAX7321AEE+T in technical solutions:

Q1: What is the MAX7321AEE+T? A1: The MAX7321AEE+T is a general-purpose I/O expander with an I2C interface, which allows for easy expansion of digital I/O ports in various applications.

Q2: What is the maximum number of I/O ports that can be expanded using the MAX7321AEE+T? A2: The MAX7321AEE+T can expand up to 8 I/O ports.

Q3: What voltage levels does the MAX7321AEE+T support? A3: The MAX7321AEE+T supports voltage levels from 1.7V to 5.5V.

Q4: Can the MAX7321AEE+T be used with both 3.3V and 5V microcontrollers? A4: Yes, the MAX7321AEE+T is compatible with both 3.3V and 5V microcontrollers.

Q5: How is the MAX7321AEE+T controlled? A5: The MAX7321AEE+T is controlled through the I2C interface, allowing for easy integration with microcontrollers.

Q6: Can the MAX7321AEE+T be used as both input and output ports? A6: Yes, the MAX7321AEE+T can be configured as either input or output ports individually.

Q7: What is the maximum current that can be sourced or sunk by each I/O port? A7: Each I/O port of the MAX7321AEE+T can source or sink up to 25mA.

Q8: Can the MAX7321AEE+T be used in automotive applications? A8: Yes, the MAX7321AEE+T is qualified for automotive applications and can operate in a wide temperature range.

Q9: Can multiple MAX7321AEE+T devices be connected together to expand the number of I/O ports? A9: Yes, multiple MAX7321AEE+T devices can be connected together using the I2C bus to expand the number of I/O ports.

Q10: Are there any evaluation boards or development kits available for the MAX7321AEE+T? A10: Yes, Maxim Integrated provides evaluation boards and development kits for the MAX7321AEE+T, which can help in the prototyping and development process.

Please note that these questions and answers are general and may vary depending on specific application requirements.