MAX4764AETB+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Analog Switch
• Characteristics: High-performance, low-voltage, dual SPST (Single-Pole Single-Throw) analog switch
• Package: 10-pin TDFN (Thin Dual Flat No-Lead) package
• Essence: Provides a compact and efficient solution for signal routing in various applications
• Packaging/Quantity: Tape and reel packaging, available in quantities of 2500 units per reel

Specifications

• Supply Voltage Range: +1.8V to +5.5V
• On-Resistance (RON): 0.6Ω (typical)
• On-Resistance Flatness: 0.15Ω (typical)
• Off-Isolation: -70dB (typical)
• Crosstalk Rejection: -80dB (typical)
• Bandwidth: 200MHz (-3dB)
• Low Distortion: -85dBc (typical)
• ESD Protection: ±15kV (Human Body Model)

Detailed Pin Configuration

The MAX4764AETB+T features the following pin configuration:

1. IN1: Input 1
2. COM1: Common terminal for Input 1
3. NO1: Normally Open terminal for Input 1
4. GND: Ground
5. NO2: Normally Open terminal for Input 2
6. COM2: Common terminal for Input 2
7. IN2: Input 2
8. V+: Positive supply voltage
9. NC: No Connection
10. V-: Negative supply voltage

Functional Features

• Dual SPST analog switch with low on-resistance and high bandwidth
• Wide supply voltage range allows compatibility with various systems
• Excellent off-isolation and crosstalk rejection for signal integrity
• Low distortion ensures high-quality signal transmission
• ESD protection safeguards against electrostatic discharge

Advantages and Disadvantages

Advantages: - High-performance analog switch with low on-resistance - Wide supply voltage range allows versatile applications - Compact TDFN package saves board space - Excellent signal integrity with low distortion and high off-isolation

Disadvantages: - Limited to dual SPST configuration, not suitable for applications requiring multiple channels - Relatively higher cost compared to basic analog switches

Working Principles

The MAX4764AETB+T is based on CMOS technology and utilizes MOSFET transistors as the switching elements. When a control voltage is applied to the respective input pin (IN1 or IN2), the corresponding switch (NO1 or NO2) connects the common terminal (COM1 or COM2) to the input terminal, allowing the signal to pass through. The low on-resistance of the switch minimizes signal attenuation and distortion.

Detailed Application Field Plans

The MAX4764AETB+T finds applications in various fields, including:

1. Audio Systems: Signal routing and selection in audio mixers, amplifiers, and receivers.
2. Communication Systems: Switching between different communication channels in telecommunication equipment.
3. Test and Measurement Instruments: Signal multiplexing and switching in test equipment.
4. Industrial Control Systems: Signal routing and control in industrial automation systems.
5. Medical Devices: Switching and routing signals in medical imaging equipment and diagnostic devices.

Detailed and Complete Alternative Models

1. MAX4567AETB+T: Similar dual SPST analog switch with lower on-resistance and higher bandwidth.
2. ADG736BRMZ-REEL7: Dual SPST analog switch with similar characteristics and package.
3. TS5A3359DBVR: Dual SPST analog switch with lower on-resistance and wider supply voltage range.

(Note: The above alternative models are provided for reference and may have different specifications and pin configurations. Please refer to the respective datasheets for detailed information.)

This entry provides an overview of the MAX4764AETB+T, a high-performance dual SPST analog switch. It includes basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.