Intersil
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ISL6594ACB-T
Voir les détails DataSheets

ISL6594ACB-T

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High-performance synchronous buck controller - Designed for high-efficiency power supply applications - Supports wide input voltage range - Provides accurate output voltage regulation - Offers advanced protection features

Package: CB (5x5 mm, 32 Ld QFN)

Essence: The ISL6594ACB-T is a highly efficient synchronous buck controller used in power management applications. It provides precise voltage regulation and offers various protection features.

Packaging/Quantity: The ISL6594ACB-T is available in a 32-lead QFN package. The quantity per package may vary depending on the supplier.

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.6V to VIN
  • Switching Frequency: Up to 1MHz
  • Maximum Duty Cycle: 100%
  • Operating Temperature Range: -40°C to +85°C
  • Features: Adjustable soft-start, overcurrent protection, undervoltage lockout, thermal shutdown, etc.

Pin Configuration

The ISL6594ACB-T has a 32-lead QFN package with the following pin configuration:

  1. VCC
  2. GND
  3. FB
  4. COMP
  5. SS/TRK
  6. SYNC
  7. RT
  8. BOOT
  9. PHASE
  10. LGATE
  11. PGND
  12. PGND
  13. PGND
  14. PGND
  15. PGND
  16. PGND
  17. PGND
  18. PGND
  19. PGND
  20. PGND
  21. PGND
  22. PGND
  23. PGND
  24. PGND
  25. PGND
  26. PGND
  27. PGND
  28. PGND
  29. PGND
  30. PGND
  31. PGND
  32. PGND

Functional Features

  • High-efficiency synchronous buck controller
  • Adjustable soft-start for controlled startup
  • Overcurrent protection to prevent damage
  • Undervoltage lockout for reliable operation
  • Thermal shutdown to prevent overheating
  • Frequency synchronization for multi-phase operation
  • Precision voltage regulation for stable output

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings - Wide input voltage range allows flexibility in applications - Advanced protection features enhance reliability - Adjustable soft-start prevents inrush current - Synchronization capability enables multi-phase operation

Disadvantages: - May require additional external components for specific applications - Limited maximum duty cycle may restrict certain designs

Working Principles

The ISL6594ACB-T operates as a synchronous buck controller, converting a higher input voltage to a lower output voltage with high efficiency. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage accurately. The controller adjusts the duty cycle of the switching transistor to maintain the desired output voltage.

Detailed Application Field Plans

The ISL6594ACB-T is suitable for various power management applications, including but not limited to: 1. DC-DC converters 2. Voltage regulator modules (VRMs) 3. Point-of-load (POL) power supplies 4. Industrial equipment power supplies 5. Telecom and networking equipment 6. Consumer electronics

Detailed and Complete Alternative Models

  1. ISL6594BCB-T
  2. ISL6594CCB-T
  3. ISL6594DCB-T
  4. ISL6594ECB-T
  5. ISL6594FCB-T

These alternative models offer similar functionality and characteristics to the ISL6594ACB-T, providing options for different design requirements.

Note: The above information is based on the available documentation and specifications provided by the manufacturer. It is recommended to refer to the official datasheet for the most accurate and up-to-date information.

Word Count: 457

Énumérez 10 questions et réponses courantes liées à l'application de ISL6594ACB-T dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ISL6594ACB-T in technical solutions:

  1. Q: What is the ISL6594ACB-T?
    A: The ISL6594ACB-T is a high-performance synchronous buck controller designed for power supply applications.

  2. Q: What is the input voltage range supported by the ISL6594ACB-T?
    A: The ISL6594ACB-T supports an input voltage range from 4.5V to 24V.

  3. Q: What is the output voltage range supported by the ISL6594ACB-T?
    A: The ISL6594ACB-T can support output voltages as low as 0.6V and up to 90% of the input voltage.

  4. Q: What is the maximum output current that the ISL6594ACB-T can handle?
    A: The ISL6594ACB-T can handle a maximum output current of 20A.

  5. Q: Does the ISL6594ACB-T have any built-in protection features?
    A: Yes, the ISL6594ACB-T has various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  6. Q: Can the ISL6594ACB-T be used in automotive applications?
    A: Yes, the ISL6594ACB-T is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification.

  7. Q: What is the switching frequency range of the ISL6594ACB-T?
    A: The ISL6594ACB-T has a wide adjustable switching frequency range from 200kHz to 1MHz.

  8. Q: Is the ISL6594ACB-T compatible with both N-channel and P-channel MOSFETs?
    A: Yes, the ISL6594ACB-T is compatible with both N-channel and P-channel MOSFETs.

  9. Q: Can the ISL6594ACB-T operate in a synchronous rectification mode?
    A: Yes, the ISL6594ACB-T supports synchronous rectification for improved efficiency.

  10. Q: What is the package type of the ISL6594ACB-T?
    A: The ISL6594ACB-T is available in a compact 20-lead QFN package.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult the manufacturer for detailed information.