Intersil
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
HIP2122FRTAZ
Voir les détails DataSheets

HIP2122FRTAZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance, high-frequency, synchronous buck converter controller
  • Package: 32-pin QFN package
  • Essence: Efficient power conversion and management
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Switching Frequency: Up to 1MHz
  • Operating Temperature Range: -40°C to +125°C
  • Efficiency: Up to 95%
  • Protection Features: Overcurrent protection, overvoltage protection, undervoltage lockout, thermal shutdown

Detailed Pin Configuration

The HIP2122FRTAZ has a total of 32 pins. The pin configuration is as follows:

  1. VIN: Input voltage
  2. BOOT: Bootstrap capacitor connection
  3. VCC: Supply voltage for internal circuitry
  4. GND: Ground reference
  5. PGND: Power ground
  6. AGND: Analog ground
  7. FB: Feedback voltage input
  8. COMP: Compensation network connection
  9. SS: Soft-start capacitor connection
  10. EN: Enable control input
  11. SYNC: Synchronization input
  12. RT: Oscillator timing resistor connection
  13. CT: Oscillator timing capacitor connection
  14. SW: Switch node connection
  15. LX: Inductor connection
  16. BST: Boost capacitor connection 17-32. NC: No connect pins

Functional Features

  • High-performance synchronous buck converter controller
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage for flexibility
  • High switching frequency enables compact designs
  • Efficient power conversion with up to 95% efficiency
  • Comprehensive protection features ensure system reliability
  • Enable control input for easy on/off operation
  • Synchronization input for multi-phase operation

Advantages and Disadvantages

Advantages

  • High-performance and high-frequency operation
  • Wide input voltage range allows for compatibility with various power sources
  • Efficient power conversion results in reduced power loss
  • Comprehensive protection features enhance system reliability
  • Compact design due to high switching frequency

Disadvantages

  • Requires additional external components for operation
  • Limited output voltage range (0.8V to 5.5V)
  • Higher cost compared to non-synchronous buck converters

Working Principles

The HIP2122FRTAZ is a synchronous buck converter controller that regulates the output voltage based on the input voltage and load conditions. It utilizes a high-frequency switching technique to efficiently convert the input voltage to the desired output voltage. The controller adjusts the duty cycle of the switching signal to maintain a stable output voltage. By using synchronous rectification, it minimizes power losses during the conversion process.

Detailed Application Field Plans

The HIP2122FRTAZ is commonly used in various applications, including:

  1. Power supplies for computer systems
  2. Telecommunication equipment
  3. Industrial automation systems
  4. Consumer electronics
  5. Automotive electronics
  6. LED lighting systems
  7. Battery charging circuits

Detailed and Complete Alternative Models

  1. LM2596: Non-synchronous buck converter controller
  2. LTC3892: High-performance synchronous buck converter controller
  3. TPS54332: Wide input voltage range synchronous buck converter controller
  4. MAX15062: High-frequency synchronous buck converter controller
  5. LT8610: High-efficiency synchronous buck converter controller

These alternative models offer similar functionality and can be considered as alternatives to the HIP2122FRTAZ based on specific application requirements.

Word count: 450 words

Énumérez 10 questions et réponses courantes liées à l'application de HIP2122FRTAZ dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of HIP2122FRTAZ in technical solutions:

  1. Q: What is HIP2122FRTAZ? A: HIP2122FRTAZ is a high-performance, dual-channel synchronous buck controller used in power supply applications.

  2. Q: What are the key features of HIP2122FRTAZ? A: The key features of HIP2122FRTAZ include wide input voltage range, adjustable switching frequency, integrated bootstrap diode, and programmable soft-start.

  3. Q: What is the maximum input voltage supported by HIP2122FRTAZ? A: HIP2122FRTAZ supports a maximum input voltage of up to 60V.

  4. Q: How many channels does HIP2122FRTAZ have? A: HIP2122FRTAZ is a dual-channel buck controller, meaning it can control two separate buck converters simultaneously.

  5. Q: Can HIP2122FRTAZ operate in a synchronous rectification mode? A: Yes, HIP2122FRTAZ supports synchronous rectification, which improves efficiency in power supply designs.

  6. Q: Is HIP2122FRTAZ suitable for automotive applications? A: Yes, HIP2122FRTAZ is designed to meet the requirements of automotive applications, including AEC-Q100 qualification.

  7. Q: Does HIP2122FRTAZ have any protection features? A: Yes, HIP2122FRTAZ includes various protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Q: Can I adjust the switching frequency of HIP2122FRTAZ? A: Yes, HIP2122FRTAZ allows you to adjust the switching frequency within a specified range to optimize your design.

  9. Q: What is the purpose of the integrated bootstrap diode in HIP2122FRTAZ? A: The integrated bootstrap diode simplifies the design by eliminating the need for an external diode in the high-side driver circuit.

  10. Q: Are there any evaluation boards available for HIP2122FRTAZ? A: Yes, there are evaluation boards and reference designs available for HIP2122FRTAZ to help you quickly prototype and evaluate your power supply solution.

Please note that these answers are general and may vary depending on the specific application and requirements.