Cantherm
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MF72-000.7D20
Voir les détails DataSheets

MF72-000.7D20: NTC Thermistor

Introduction

The MF72-000.7D20 is a type of NTC (Negative Temperature Coefficient) thermistor, which belongs to the category of electronic components used for temperature sensing and compensation in various electronic circuits. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MF72-000.7D20 NTC thermistor.

Basic Information Overview

  • Category: Electronic Components
  • Use: Temperature Sensing and Compensation
  • Characteristics: Negative Temperature Coefficient, High Sensitivity
  • Package: Radial Leaded
  • Essence: Accurate Temperature Measurement
  • Packaging/Quantity: Bulk Packaging, Quantity Varies

Specifications

  • Resistance at 25°C: 0.7Ω
  • Tolerance: ±20%
  • Maximum Power Dissipation: 400mW
  • Operating Temperature Range: -55°C to 125°C
  • Thermal Time Constant: 10s

Detailed Pin Configuration

The MF72-000.7D20 NTC thermistor has a radial leaded package with two leads. The pin configuration is as follows: - Pin 1: Connected to one end of the thermistor element - Pin 2: Connected to the other end of the thermistor element

Functional Features

  • Temperature Sensing: Provides accurate resistance changes with temperature variations
  • High Sensitivity: Exhibits a high sensitivity to temperature changes
  • Stability: Offers stable performance over a wide temperature range

Advantages and Disadvantages

Advantages

  • High sensitivity to temperature changes
  • Accurate temperature measurement
  • Stable performance over a wide temperature range

Disadvantages

  • Tolerance of ±20% may require additional calibration in some applications
  • Limited operating temperature range compared to some alternative models

Working Principles

The MF72-000.7D20 NTC thermistor operates based on the principle of negative temperature coefficient, where its resistance decreases as the temperature increases. This property allows it to be used for temperature sensing and compensation in electronic circuits.

Detailed Application Field Plans

The MF72-000.7D20 NTC thermistor finds extensive use in various applications, including: - Temperature monitoring and control in industrial equipment - Thermal protection in power supplies and battery chargers - Temperature compensation in automotive electronics - Overheating protection in consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the MF72-000.7D20 NTC thermistor include: - NTCLE100E3103JB0: Similar characteristics with tighter tolerance - NTCG163JF103FT1: Wide operating temperature range with lower sensitivity - NTCG164BH103JT1: Higher power dissipation capability with similar resistance

In conclusion, the MF72-000.7D20 NTC thermistor is a vital electronic component known for its high sensitivity and accurate temperature measurement capabilities. Its application spans across various industries, making it an essential part of temperature-sensitive electronic circuits.

Word Count: 410

Énumérez 10 questions et réponses courantes liées à l'application de MF72-000.7D20 dans les solutions techniques

  1. What is MF72-000.7D20?

    • MF72-000.7D20 is a type of NTC thermistor, which is a temperature-sensitive resistor that decreases in resistance as its temperature increases.

  2. What are the typical applications of MF72-000.7D20?

    • MF72-000.7D20 is commonly used for temperature compensation, temperature measurement, and overcurrent protection in various electronic devices and circuits.

  3. What is the resistance value of MF72-000.7D20 at room temperature?

    • The resistance value of MF72-000.7D20 at room temperature is 7Ω.

  4. How does MF72-000.7D20 behave in response to changes in temperature?

    • MF72-000.7D20 exhibits a negative temperature coefficient (NTC), meaning its resistance decreases as the temperature increases.

  5. Can MF72-000.7D20 be used for inrush current limiting?

    • Yes, MF72-000.7D20 can be used for inrush current limiting in power supplies and other electronic equipment.

  6. What is the maximum operating temperature for MF72-000.7D20?

    • The maximum operating temperature for MF72-000.7D20 is typically around 125°C.

  7. Is MF72-000.7D20 suitable for battery pack protection?

    • Yes, MF72-000.7D20 can be used for battery pack protection by limiting the charging current to prevent overcharging.

  8. What are the advantages of using MF72-000.7D20 in temperature compensation circuits?

    • MF72-000.7D20 offers high sensitivity to temperature changes, fast response times, and stable performance over a wide temperature range.

  9. Can MF72-000.7D20 be used in automotive applications?

    • Yes, MF72-000.7D20 is suitable for automotive applications such as temperature sensing and overcurrent protection in vehicle electronics.

  10. Are there any precautions to consider when using MF72-000.7D20 in technical solutions?

    • It's important to ensure proper thermal management to avoid self-heating effects, and to adhere to the manufacturer's specifications for voltage and current ratings to prevent damage to the thermistor.